WIFI BULLET CAM
HOW-TO & MANUAL
Complete setup guide for your WiFi Bullet Cam
STEP 1
Insert an SD Card
Your WiFi Bullet Cam requires a Class 10 MicroSD card, up to 128GB capacity (not included). Insert the card into the MicroSD slot on the camera body — it should click firmly into place.
STEP 2
Charge the Camera
Charge fully before first use using the supplied USB cable. The indicator light is red while charging and turns off when complete — approximately 1.5–2 hours.
STEP 3
Choose Your Mount
Three mounting options are included: Handlebar clamp for motorcycles and bikes, Helmet adhesive pad for direct helmet mounting, or the Garmin quarter-turn mount — compatible with any existing Garmin mount point. Ensure a clear forward-facing view before riding.
STEP 4
Download the Viidure App
The Viidure app gives you a live preview from the camera, lets you adjust settings, and download clips — free on iOS and Android.
STEP 5
Connect Your Phone to the Camera
Open your phone’s WiFi settings and connect to the camera’s hotspot:
Select CHILLITECH and enter the password:
“No Internet Connection” is completely normal — the camera creates a local WiFi network, not an internet connection.
STEP 6
Open Viidure & Start Recording
Open the Viidure app to connect and see a live view from your camera.
Press Record to start — the red indicator light confirms recording is active. Disconnect your phone from WiFi before riding — the camera records independently and staying connected drains your phone battery.
STEP 7
View Your Footage
After your ride: reconnect to CHILLITECH WiFi and browse recordings in the Viidure app, or remove the MicroSD card and use a card reader with your computer. Video files are in MP4 format.
Need More Help?
Contact our support team or download the full PDF manual below.